1. {Name}
    Welcome to the KKF!
    Please take a moment to register and stop by the New Member Check-In and say hello. We sincerely hope you enjoy your stay and the discussion of all things sharp.
    Feel free to jump right in on the conversation or make your own. We have an edge on life!
    Dismiss Notice
  2. Take a look at our new AUCTION SYSTEM

    This service is available to all KKFora members to both Bid on and Auction off (Sell)items.
    Dismiss Notice

a bit of news

Discussion in 'Harner Knives' started by butch, Jun 25, 2021.

  1. butch

    butch Founding Member

    we are selling the house down sizing and building a bigger shop. that said we will be waiting out insane lumber prices. that puts my took a loss last year knife making job into i will get a real gig for at least as long as it takes to build a new workshop. cant see a new shop happening till at least next summer. will hopefuly have a small shop set up with the most used tools as a stop gap but time will tell what kind of output i might have. the market has not been kind th last few years and i have seen its ups and downs. i have no plans on hanging up the maker in me but for a whille at least it loooks liek its goig to be a side gig
     
  2. Jim

    Jim Old Curmudgeon Founding Member

  3. WildBoar

    WildBoar Founding Member Contributor

    well our loss will be some employers gain. Hope you find something interesting to do. And hopefully something where you will not need to wear a coat and tie every day :cool:
     
  4. Wagner the Wehrwolf

    Wagner the Wehrwolf Founding Member

    Good luck and wishes for lots of patience!
     
  5. Toothpick

    Toothpick #2 since day #1 Founding Member

  6. Lucretia

    Lucretia Founding Member

    Good luck to you! We'll keep you in our thoughts--your little paring knife is our go-to for dividing up steaks and chops (we don't get whole ones anymore) and we send good wishes to you every time we use it.
     
  7. butch

    butch Founding Member

    as my closing date gets closer im feeling the pinch of not haveing a new shop to set up proper and where i will put tools and gear that i cant make fit
     

Share This Page