1. {Name}
    Welcome to the KKF!
    Please take a moment to register and stop by the New Member Check-In and say hello. We sincerely hope you enjoy your stay and the discussion of all things sharp.
    Feel free to jump right in on the conversation or make your own. We have an edge on life!
    Dismiss Notice
  2. Take a look at our new AUCTION SYSTEM

    This service is available to all KKFora members to both Bid on and Auction off (Sell)items.
    Dismiss Notice

Hiromoto Aogami Super (AS) Steel Gallery - Full Spa Treatment

Discussion in 'JapaneseKnifeSharpening / Dave Martell Knives' started by Dave Martell, Mar 1, 2014.

  1. Dave Martell

    Dave Martell Professional Craftsman Founding Member

    We've got another Hiromoto AS gyuto back from it's trip through the full spa treatment! [​IMG]

    It's blade has been thinned, spine/choil rounded, & etched for effect. The handle has been converted from full tang western to hidden tang hybrid wa. The wood used is Ipe burl.

    This knife gave me fits! From the wood (Ipe - never again!) to the etching, nothing went easy. In fact this Hiromoto took more than twice the amount of labor than the next worse one ever done. I can't say that I'm happy with the wood, its just not really that nice, but the blade finish I ended up with is the finest I've ever done on one of these knives. The scratch pattern is tight (running horizontal), is bright, and slick as snot....what else could you want? [​IMG]

    I hope that the owner has more fun using it than I did working on it! LOL Still I'm grateful for the work and the experience, I learned a new trick or two on this one.

    What do you guys think?


    P1010001.JPG P1010003.JPG P1010008.JPG P1010011.JPG P1010012.JPG P1010013.JPG P1010014.JPG P1010016.JPG P1010023.JPG
    P1010006.JPG
     
  2. MattS

    MattS Founding Member

    Beauty. The handle may have given you fits, but the end result...wow. I have been itching to try one like this since you first did it.
     
  3. Dave Martell

    Dave Martell Professional Craftsman Founding Member

  4. Dave Martell

    Dave Martell Professional Craftsman Founding Member

  5. It's the prettiest Hiromoto i've seen. Good job, Dave!
     
  6. Dave Martell

    Dave Martell Professional Craftsman Founding Member

  7. toddnmd

    toddnmd Founding Member

    Beautiful work!
     
  8. Dave Martell

    Dave Martell Professional Craftsman Founding Member

  9. Dave Martell

    Dave Martell Professional Craftsman Founding Member

    I've got another Hiromoto AS freshly finished up from it's full spa treatment....

    The handle wood is AZ Ironwood. This block is kind of unique from what I usually see. It gave off this really bright yellow dust that was so super fine it floated everywhere. The actual color of the wood is really orange though, with some gold. It worked very nicely and was easy to finish. Not a single hole/crack/anything to fill - the black dot seen on the top is 100% natural.

    The pins used are all copper but the center pin is a mosaic with nickel silver inner pins.

    I used my new technique to finish the blade and I like it a lot. It's a bit more labor intensive but the results are better than I had been doing so I guess I'll keep doing it this way.

    What do you think?

    P1010002.JPG P1010003.JPG P1010010.JPG P1010012.JPG P1010014.JPG P1010016.JPG P1010029.JPG P1010030.JPG
     
  10. Dave Martell

    Dave Martell Professional Craftsman Founding Member

    Here's a Hiromoto AS gyuto that's been just run through the full spa treatment. :cool:

    The core steel on this one was greatly off center and the cladding really hard in comparison to others and also unevenly ground making for a challenge to both thin and finish nicely. I think it came out OK in the end even, if not exactly as how I'd have wished it.

    And who doesn't like ironwood? :)

    Maybe the last we'll see go through this process, who knows....

    P1010000.JPG P1010010.JPG P1010011.JPG P1010014.JPG P1010016.JPG P1010023.JPG P1010025.JPG P1010028.JPG
     
  11. Dave Martell

    Dave Martell Professional Craftsman Founding Member

  12. Jim

    Jim Old Curmudgeon Founding Member

  13. Dave Martell

    Dave Martell Professional Craftsman Founding Member

  14. Dave Martell

    Dave Martell Professional Craftsman Founding Member

    Here's another Hiromoto AS that's just been through the spa treatment except this one had some additional work done to it. :cool:

    This knife belongs to an old friend from back in the KF days. It's always both nice and a bit stressing to work on a friend's knife because my expectations go even higher than they should and I almost never meet them but in this case I exceeded what I hoped to accomplish so I'm actually happy for once...LOL

    The knife came to me as a metal bolstered western configuration that I was tasked to convert to a bolster-less octagonal wa configuration so I ground off the old handle and metal bolster and made a new handle for it.

    Conversion.jpg


    The wood was supplied by the customer, it's desert ironwood with sap wood. He asked me to include as much sapwood as possible and I worked to do this as best as I could. He wanted a metal spacer stack so I put together an 11 piece stack consisting of copper, nickel silver, and G10 spacers. I really love this handle a lot, it's one of my favorites that I've done.

    I hope you like it as much Jay! :)


    P1010001.JPG P1010003.JPG P1010006.JPG P1010010.JPG P1010011.JPG P1010014.JPG P1010020.JPG P1010023.JPG P1010028.JPG
     
  15. Jim

    Jim Old Curmudgeon Founding Member

  16. Dave Martell

    Dave Martell Professional Craftsman Founding Member

  17. Jim

    Jim Old Curmudgeon Founding Member

  18. Dave Martell

    Dave Martell Professional Craftsman Founding Member

    Nope, it's just that a wa handle makes them look shorter than the westerns do because a wa handle is slightly taller.
     
  19. Jim

    Jim Old Curmudgeon Founding Member

Share This Page