1. {Name}
    Welcome to the KKF!
    Please take a moment to register and stop by the New Member Check-In and say hello. We sincerely hope you enjoy your stay and the discussion of all things sharp.
    Feel free to jump right in on the conversation or make your own. We have an edge on life!
    Dismiss Notice
  2. Take a look at our new AUCTION SYSTEM

    This service is available to all KKFora members to both Bid on and Auction off (Sell)items.
    Dismiss Notice

172 x 47 Nikiri Project in 52100

Discussion in 'Brock Cutlery' started by Mark Brock, Feb 27, 2020.

  1. Mark Brock

    Mark Brock Professional Craftsman

    This is the first of the two Nikiri blades I'm working up. This one is turning out great so far.
    Tapered blade from 3mm above heal to 1.4mm at tip.
    Mile convex grind with thin cutting tip. Should be very nice to work with.

    Nikiri-1.jpg
     
  2. Toothpick

    Toothpick #2 since day #1 Founding Member

  3. cheflarge

    cheflarge Founding Member

    :cool:
     
  4. Mark Brock

    Mark Brock Professional Craftsman

    This one is getting close to done. Gluing up the handle now. This will be available. I'll give a full description later this evening or tomorrow.

     
  5. Mark Brock

    Mark Brock Professional Craftsman

    Hi All, this one is finished and available.
    52100 at 62 hardness. Thin slight convex grind done on rotary platen. Full distal taper from 3mm down to 1mm.
    Choil and spine rounded for comfort. Balance is just behind the choil as shown in the photo below.

    Ironwood with silver half dollar spacer, buffed lightly. This ironwood has a glow and grain that is not common. A very beautiful piece to be sure. Not overly gaudy, just elegant lines and grain.
    Blade sanded to 1200 and buffed lightly. It's not a mirror finish, but I am liking it. Should take a great patina.

    Asking $255.00 plus shipping. Saya might be something we can talk about if desired.
    Thanks for having a look!

    52100-Nakiri-1.jpg
    52100-Nakiri-2.jpg
    52100-Nakiri-2b.jpg
    52100-Nakiri-3.jpg
    52100-Nakiri-4.jpg 52100-Nakiri-5.jpg 52100-Nakiri-6.jpg 52100-Nakiri-7.jpg
     
  6. Jim

    Jim Old Curmudgeon Founding Member

    That looks very elegant Mark. Congratulations on what should be a wicked cutter.
     
  7. Spaz

    Spaz Founding Member

    Excellent!
     
  8. WarrenB

    WarrenB Contributor

  9. Mark Brock

    Mark Brock Professional Craftsman

  10. Mark Brock

    Mark Brock Professional Craftsman

    I'm going to go ahead and lower this to $215.00 plus shipping.
     

Share This Page